1. Prepping the natural nail: A diamond bit effectively removes shine from natural nails, promoting better adhesion for nail enhancements.
2. Superior exfoliation: Unlike cutting, a diamond bit provides superior exfoliation, gently buffing away excess skin and buildup around the cuticles, leaving the nails looking cleaner and more polished.
3. Sealing the cuticle: Using a diamond bit helps seal the cuticle, enhancing adhesion and ensuring long-lasting results for your nail enhancements.

We've seen many nail techs using the carbide bit to seal the cuticle. While this technique can work, using the carbide bit alone isn't enough to create that seamless, flawless cuticle look we all aim for. If the cuticle and sidewalls aren’t sealed properly, you’ll notice gaps where gel polish can pool, causing the final product to look uneven in pictures and videos.

To truly achieve a flawless manicure, it’s crucial to seal the nail using the Hurricane Precision Cuticle Bit Pro 2.0. This step ensures there are no gaps, giving you a clean finish and the perfect surface for gel topcoat application.

No gaps = No lifting, and a more professional, polished result! 🖤

Speed and Direction Settings for the Diamond Bit’s Exfoliation

Processing the Right Side:

Direction: Forward

Speed:

• 4K RPM for Sensitive Skin Type
• 10K RPM for Tougher Skin Type

Steps:

1. Place the bit at a 30-degree angle. Avoid touching the natural nail to prevent over-filing the nail plate. The pear diamond bit's safety round tip reduces the risk of damaging the nail plate.
2. Move towards the left side to the point of growth.
3. Exfoliate the dead skin with the belly of the bit.
4. During the first pass, lift up the “rim” by touching the ends of the flaky skin area with the diamond bit.
5. In the second pass, exfoliate the cuticle following a white line.

Suggestions:

The speed of the nail e-bit should match the technician’s experience and the client’s cuticle type. Beginners should use a speed of 4K-6K RPM, while experienced technicians can safely use speeds of 6K-10K RPM or higher.

 It’s EXTREMELY IMPORTANT to pull the cuticle back while processing. This will help avoid injuring the live skin tissue.

Speed and Direction Settings for the Flame Bit

Processing the Left Side

• Direction: Forward
• Speed: 18,000 RPM - 35,000 RPM
• Steps:

1. Place the bit in the middle of the base of the nail plate.
2. Move towards the left side to the point of growth.
3. Exfoliate the sidewalls with the belly of the bit.

Processing the Right Side

• Direction: Reverse
• Speed: 18,000 RPM - 35,000 RPM
• Steps:

1. Place the bit in the middle of the base of the nail plate.
2. Move towards the right side to the point of growth.
3. Exfoliate the sidewalls with the belly of the bit.

Suggestions:

The speed of the nail e-bit should match the technician’s experience and the client’s cuticle type. Beginners should use a speed of 6K -15K RPM, while experienced technicians can safely use speeds of 18K RPM or higher.

A1: Sanding bands only remove the shine, while the Hurricane Precision Round Edge Bit cleans and lifts cuticles, eliminating dead flaky and dry skin tissue for better nail retention.

A2: It can last for up to 200 services or 4 months, depending on usage and care.

A3: Absolutely! Beginners should start with a lower RPM (around 4K-6K) to ensure control, gradually increasing speed as they gain more experience.

A4: It's common to face challenges when first learning to use an E-File, and I understand how frustrating it can be. Here are a few tips that might help:

1. Light Pressure: Ensure you're using very light pressure. The e-file should glide over the nail, not press into it.
2. Proper Angle: Maintain the correct angle, typically around 45 degrees, to avoid friction and heat buildup.
3. Consistent Movement: Keep the bit moving steadily to prevent overheating in one spot.

It's crucial to practice these techniques to avoid burning sensations. With a bit of practice and the right approach, you'll gain confidence and comfort using the e-file on both yourself and your clients

Proper maintenance of your e-bits is essential for ensuring their longevity and performance. Follow these steps to clean and sanitize your e-bit:

Step 1: Clean

• After each use, clean the bit to remove any debris, dust, or product buildup.
• Use a small cleaning brush with soap and warm water to gently scrub the bit's surface.

Step 2: Disinfect

• Soak the bit in a liquid disinfectant (non-acidic, non-oxidizing) for the recommended time on the disinfectant label.
• Note: Avoid soaking for more than 35 minutes, as prolonged exposure may erode the diamond coating.

Step 3: Dry Thoroughly

• After disinfection, ensure the bit is completely dry before storing it away.
• Use a soft cloth or paper towel to pat the bit dry and air-dry fully before storing.

Step 4: Store Safely

• Store the bit in a dry, cool place away from moisture and other contaminants to avoid rust or damage.

Additional Tips:

• Consider using an Ultrasonic Cleaner for a deep clean to ensure every part of the bit is spotless.
• Avoid using strong acid or oxidizing disinfectants, as these can damage the bit’s coating.
• Rotate bits regularly to maintain peak performance and client comfort.